ActSafe PME User Manual download pdf (Page 26)

26

© Copyright ActSafe Systems AB

SERVICE & MAINTENANCE

Spark plug

The spark plug can have deposits on the

electrodes, which may result in malfunction

and/or starting diculties. The spark plug

condition is inuenced by:

• A dirty air lter.

• Hard running conditions.

In some areas, local legislation requires

using a resistor spark plug to suppress

ignition signals. If the engine was originally

equipped with a resistor spark plug, you

have to choose the same type of spark plug

whenever you replace it.

Equipment list

Hex key 4 mm – straight end

Wrench 10 mm

Wrench 13 mm

Screwdriver

Pliers and hammer

Material

Thin Oil

CRC 5-56

Loctite 243

Grease Interon LS 2

Oil level check and change

Check the engine oil level with the engine

stopped and in a level position. Change the

oil regularly to prolong the lifetime of the

engine.

Spare parts

The most common parts are listed here;

contact ActSafe Systems AB or your local

distributor if you don’t nd your part here.

Rope grab 50-150-101

Cover 50-150-103

Knife 50-150-105

Safety Shear bolt 50-150-115

Loop 50-150-106

Sling 50-150-112

Karabiner 50-105-052

Drain the used oil when the engine is warm.

Warm oil drains quickly and completely.

RECOMMENDATION

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments