ActSafe PME User Manual download pdf (Page 23)

23

User’s Manual PME Ascender 4-stroke engine

SERVICE & MAINTENANCE

Maintenance recommendation

SERVICE & MAINTENANCE

Use only original spare parts / material

recommended by ActSafe Systems AB.

Clean the unit regularly (the performance

will be a ected negatively by excessive

dust, clogged parts etc). Check the kara-

biners for oxidation. Clean and lubricate if

needed.

Check the engine oil, replace if needed

Check the air  lter, clean or replace if

needed.

Clean the ascender

of salt water/dirt

NOTE ! Do not use running water

or any degreasing agent, never use

a high-pressure washer!

• Clean and dry the ascender with a wet

cloth or brush after use, removing all

moisture and dirt.

• Dry dust can be removed

with compressed air.

• Clean the karabiner thoroughly,

lubricate with thin oil.

1. Take o the rescue kit bag

(velcro connection).

2. Rotate the rope grab if needed

so the shear pin comes visible.

3. Unscrew the shear pin using a

screwdriver and a shift key.

4. Attach the new safety shear bolt

with a 13 mm wrench. Use Loctite 243.

Do not over-tighten!

Remove the ignition cable before service.

Do this to avoid accidental start-up during

maintenance work.

RECOMMENDATION

Keep the engine cylinder  ns and control parts

free from dirt and other foreign substances,

which could aﬀ ect the revolution speed.

Go through “Checklist before and after usage”

at every maintenance to increase the safety for

the user (/users) of the product.

RECOMMENDATION

If a safety shear bolt is broken, regardless of the

reason, it must be sent to an authorized dealer

for safety inspection! The ascender must not be

used before this inspection is done.

DANGER

Changing a broken

safety shear bolt

This service must only be performed by ActSafe

or an authorized ActSafe distributor.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Comments to this Manuals

No comments