25
User’s Manual PME Ascender 4-stroke engine
SERVICE & MAINTENANCE
Changing the primary connection sling
If unsure of any of these steps, contact
ActSafe Systems AB or local distributor.
1. Use pliers to force the captive bar out.
2. Remove the karabiner and the sling.
3. Push the new sling through the chassis
holes.
4. Connect the new karabiner and lock it
with a captive bar.
Engine maintenance
For full information about the engine main-
tenance points and schedule, check the
included owner’s engine manual.
Remember to change the oil after the
rst 10 hours of usage. (Normal service
period 50 hours/6 months.)
Carburettor settings
The carburettor should be adjusted to keep
the rope grab from turning during engine
idle.
Air lter
The air lter should be cleaned daily or
more often if working in exceptionally dirty
areas in order to avoid problems such as:
• Carburettor malfunctions.
• Starting problems.
• Engine power reduction.
• Unnecessary wear on the engine parts.
• Abnormal fuel consumption.
Comments to this Manuals