ActSafe PME User Manual download pdf (Page 15)

User’s Manual PME Ascender 4-stroke engine

SYSTEM DESCRIPTION

NO PART

1 Secondary connection

2 Lower hole, NOT FOR LIFTING

3 Loop (Rope guide)

4 Knife

5 Rope Cover

6 Rope Grab

General

This product has been designed for lifting a

person or load in a static rope system (inclu-

ding backup rope) with ropes of 10-13 mm

approved by EN1891. The dead rope shall be

unloaded.

The karabiner in the primary connection

can be replaced by any other karabiner

approved by EN362. The sling in the chassis

cannot be replaced by anything other than

an original spare part from ActSafe Systems

AB.

Engine & fuel

The ascender is equipped with a 4-stroke

engine. Normal 4-stroke unleaded petrol

91-octane or higher may be used. However,

we recommend the use of a 4-stroke alcylate-

petrol 95 octane.

• It gives the engine higher performance.

• It gives a cleaner engine.

• Alcylate 4-stroke petrol can be stored

for long periods without impairing the

quality.

• It does not contain the toxins lead,

benzene, aromatics or sulphur.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

ActSafe PME User Manual Page 15